Imaging the mechanical properties of nanowire arrays

verfasst von: Tianran Ma, Michael Fahrbach, Jiushuai Xu, Frank eric boye Anang, Maximilian Vergin, Florian Meierhofer, Uwe Brand, Andreas Waag, Erwin Peiner
Abstract: Dimensional and contact resonance (CR) images of nanowire (NW) arrays (NWAs) are measured using our newly developed microprobe CR imaging (CRI) setup. Then a reference method is employed to calculate the indentation modulus of NWs (M i,NW ) representing the elasticity of NWs, by measuring NWAs and reference samples at the same static probing force. Furthermore, topography is imaged in combination with CR and M i,NW separately by software, in which the z values indicate the topography of the NWs and the color bars show its CR or M i,NW . Then NWs' topography relation to M i,NW is visualized. As typical examples, 3D imaging of topography and measurement of M i,NW is performed with Si<111> pillar arrays as well as Cu and ZnO NWAs. The novel method enables fast mechanical performance measurements of large-scale vertically-aligned NWAs without releasing them from their respective substrates. For instance, the diameter and pitch of the Si<111> pillars and the diameter of the Cu NWAs are in good agreement with the values measured by scanning electron microscopy (SEM). The position of ZnO NWs bunches grown at arbitrary sites on silicon can be identified with the help of combined topography and indentation modulus images. Furthermore, M i,NW measured by our homemade CRI setup agrees well with bulk values. Differences between the measured M i,NW and bulk M i values may be related to a size effect in NW elasticity.
Externe Organisation(en): Institut für Halbleitertechnik (IHT)
Physikalisch-Technische Bundesanstalt (PTB)
Typ: Artikel
Journal: tm - Technisches Messen
Band: 91
Seiten: 268-279
Anzahl der Seiten: 12
ISSN: 0340-837X
Publikationsdatum: 27.05.2024
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Instrumentierung, Elektrotechnik und Elektronik
Elektronische Version(en): https://doi.org/10.1515/teme-2023-0159 (Zugang: Unbekannt)
https://www.degruyter.com/document/doi/10.1515/teme-2023-0159/html (Zugang: Unbekannt)

BibTeX

@article{dbabab2ac5664dab86cf80009e1950ed,
title = "Imaging the mechanical properties of nanowire arrays",
abstract = "Dimensional and contact resonance (CR) images of nanowire (NW) arrays (NWAs) are measured using our newly developed microprobe CR imaging (CRI) setup. Then a reference method is employed to calculate the indentation modulus of NWs (M i,NW ) representing the elasticity of NWs, by measuring NWAs and reference samples at the same static probing force. Furthermore, topography is imaged in combination with CR and M i,NW separately by software, in which the z values indicate the topography of the NWs and the color bars show its CR or M i,NW . Then NWs' topography relation to M i,NW is visualized. As typical examples, 3D imaging of topography and measurement of M i,NW is performed with Si<111> pillar arrays as well as Cu and ZnO NWAs. The novel method enables fast mechanical performance measurements of large-scale vertically-aligned NWAs without releasing them from their respective substrates. For instance, the diameter and pitch of the Si<111> pillars and the diameter of the Cu NWAs are in good agreement with the values measured by scanning electron microscopy (SEM). The position of ZnO NWs bunches grown at arbitrary sites on silicon can be identified with the help of combined topography and indentation modulus images. Furthermore, M i,NW measured by our homemade CRI setup agrees well with bulk values. Differences between the measured M i,NW and bulk M i values may be related to a size effect in NW elasticity.",
keywords = "3D contact resonance imaging (CRI), indentation modulus of NWs (M ), nanowire arrays (NWAs)",
author = "Tianran Ma and Michael Fahrbach and Jiushuai Xu and Anang, {Frank eric boye} and Maximilian Vergin and Florian Meierhofer and Uwe Brand and Andreas Waag and Erwin Peiner",
note = "Publisher Copyright: {\textcopyright} 2024 Walter de Gruyter GmbH, Berlin/Boston.",
year = "2024",
month = may,
day = "27",
doi = "10.1515/teme-2023-0159",
language = "English",
volume = "91",
pages = "268--279",
journal = "tm - Technisches Messen",
issn = "0340-837X",
publisher = "R. Oldenbourg",
number = "5",
}