Airborne sound emission as a process monitoring tool in the cut-off grinding of concrete

verfasst von: Lars Robben, Sameh Rahman, Josef Christian Buhl, Berend Denkena, Benjamin Konopatzki
Abstract: A detailed analysis of the airborne sound emitted in the cut-off grinding of concrete with a diamond grinding disk is presented. It is shown that the frequency spectra of airborne sound emitted in the cutting process contain detailed information about the process conditions. As long as the machining parameters are appropriate for the work piece, the airborne sound spectra show statistically excited natural frequencies and turning frequencies. In this case the total signal level gives sufficient evidence of the work piece composition and machinability. The effects of inappropriate machining parameters, like tool deflection or very high friction forces acting on the tool, can be identified by means of distinct frequencies in the airborne sound spectra. In addition, the emitted airborne sound can be used to image the structure of the flat joint surface, which cannot be determined by another method. With regard to everyday applications, the results obtained by this procedure can be used to apply airborne sound analysis systems to machines and detect process parameters which are overstressing the cutting tool.
Organisationseinheit(en): Institut für Mineralogie
Institut für Fertigungstechnik und Werkzeugmaschinen
Typ: Artikel
Journal: Applied acoustics
Band: 71
Seiten: 52-60
Anzahl der Seiten: 9
ISSN: 0003-682X
Publikationsdatum: 01.2010
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Akustik und Ultraschall
Elektronische Version(en): https://doi.org/10.1016/j.apacoust.2009.07.004 (Zugang: Unbekannt)

BibTeX

@article{33ac7b3f7c874367b7286f6e5c22ae23,
title = "Airborne sound emission as a process monitoring tool in the cut-off grinding of concrete",
abstract = "A detailed analysis of the airborne sound emitted in the cut-off grinding of concrete with a diamond grinding disk is presented. It is shown that the frequency spectra of airborne sound emitted in the cutting process contain detailed information about the process conditions. As long as the machining parameters are appropriate for the work piece, the airborne sound spectra show statistically excited natural frequencies and turning frequencies. In this case the total signal level gives sufficient evidence of the work piece composition and machinability. The effects of inappropriate machining parameters, like tool deflection or very high friction forces acting on the tool, can be identified by means of distinct frequencies in the airborne sound spectra. In addition, the emitted airborne sound can be used to image the structure of the flat joint surface, which cannot be determined by another method. With regard to everyday applications, the results obtained by this procedure can be used to apply airborne sound analysis systems to machines and detect process parameters which are overstressing the cutting tool.",
keywords = "Concrete, Cut-off grinding, Grinding disk, Noise reduction, Process monitoring, Process technology, Sound analysis",
author = "Lars Robben and Sameh Rahman and Buhl, {Josef Christian} and Berend Denkena and Benjamin Konopatzki",
note = "Funding information: The authors would like to thank the Deutsche Forschungsgemeinschaft for funding this research Project (Bu1020/9-1, DE447/36-1). The authors would also like to thank the reviewers whose comments greatly improved this paper.",
year = "2010",
month = jan,
doi = "10.1016/j.apacoust.2009.07.004",
language = "English",
volume = "71",
pages = "52--60",
journal = "Applied acoustics",
issn = "0003-682X",
publisher = "Elsevier Ltd.",
number = "1",
}